Forkross НП 52.1
The plinth description
A plastic plinth NP 52.1 with the cable-channel and with soft edges is identical to the plinth Korner LP 52.1 according to its geometry and basic properties. Geometry similarity of the plinths gives the chance to use accessories from LP 52.1 for NP 52.1 and on the contrary. And it allows to make smooth transition from LP 52.1 to its cheaper domestic "brother" - to the plinth NP 52.1.
It is important to say that the accessories to the plinth Forkross NP 52.1 (the internal and external corners, the adapters (connectors) and the face chokes) are made not only monophonic, but also with the tree structure that essentially enriches perception of a plinth and allows to single out from the wide choice of plinths offered in the Russian market. Certainly, it will be positively good on your sales.
It is a universal plinth for furnish of any kind of floor coverings. It consists of two parts: an internal assembly profile and an external decorative lath. Soft edges of a plinth densely bear up to a wall and a floor. There is a cable-channel in the plinth for placing of wires. The plinth is intended, first of all, for the clients who value the quality, an aesthetics and convenience in use.
The plinth installation under a cable-channel
- To draw the premise drawing where the plinth installation is planned.
- To count on the necessary quantity of accessories – the internal and external corners, the face chokes, the connecting and fixing elements.
- If it is necessary you should cut a plinth.
- The plinth is mounted on butterfly screws (an interval no more than 50 sm) or on liquid nails (glue).
- Attach an internal assembly profile to a wall.
- Lay the wires on channels.
- Latch a decorative lath.
ATTENTION! The plinth damages are possible if you install wrong.
The installation of assembly boxing
Sizes
Length: 2500 мм
Width: 52 мм
Thickness: 22 мм
Soft edge: 5 мм
The colour and the texture
Accessories



















