Korner LP 49, 52, 52.1
The plinth with cable-channel LP-52, Korner LP-52.1
The multi-purpose plinth for furnish of any kind of firm floor coverings LP-52 is easily mounted to a wall by means of dowel-nails and allows to hide electric conducting in the cable-channel. Soft edges of a plinth densely bear up to a wall and a floor. Pay attention, we offer the last updating of this plinth (LP-52.1) with the expanded assembly cavity.
Additional accessories of the plinth – the internal and external corners, the joints and face chokes are completely compatible to the similar elements of the plinth LP-49.
A plinth with the cable-channel Korner LP-49
A multi-purpose plinth for furnish of any kind of firm floor coverings. It consists of two parts: an internal assembly profile and an external decorative profile.
Soft edges of the plinth densely bear up to a wall and a floor. There is a channel under electric conducting in the plinth.
The plinth accessories are the internal and external corners, the joints and face chokes, they are completely compatible to the similar elements of the plinth LP-52.
The plinth installation under a cable-channel
The popularity of this plastic plinth is in its simple and fast installation of all design. It can be dismantled easily, and then mounted back. Why is it important? Probably, you will have the desire to change wall-paper, to spend a new cable, to tighten linoleum in the future.
- To draw the premise drawing where the plinth installation is planned.
- To count on the necessary quantity of accessories – the internal and external corners, the face chokes, the connecting and fixing elements.
- To buy a necessary quantity of a material at your supplier.
- If it is necessary you should cut a plinth.
- Drill an aperture using the paper tape punch.
- Attach a fixing lath using a dowel and a screw to a wall (the interval no more than 50 cm).
- Lay wires on channels of a fixing lath.
- Fix a decorative profile on a fixing lath using a small hammer.
ATTENTION! Fastening or plinth damages are possible if you install wrong.
The installation of assembly boxing
Application
It is a universal finishing plinth for all kinds of floor coverings.
It is intended, first of all, for the clients who value the quality, an aesthetics and convenience in use.
Length of the plinth is 2,5 m.
The colour and the texture
411 Old pine-tree
424 Gold beech
434 Oak satter
440 Alder
460 Cherry 
480 Canadian elm
493 Classic mahogany
430 Dark oak
421 Dark beech
431 Light beech
435 Natural oak
441 Dark alder
461 Light cherry
490 Oak Oregon
426 Venerable oak
422 Beech
432 Cottage oak
436 Rustical oak
442 Red alder
470 Nut
491 Blue alder
427 Oak prestige
423 Natural beech
433 Oak
437 Gold oak 
450 Light mahogany
471 Light nut
492 Nut Venice
428 Vine oak
Accessories
